Methyl sulfoxide
Synonyms:
- dimethyl sulfoxide
- dimethylsulfoxide
Acronym: DMSO
Molecular formula: |
C2H6OS |
Molar mass: |
78.14 g·mol-1 |
CAS registry number: |
67-68-5 |
EINECS number: |
200-664-3 |
RTECS number: |
PV6210000 |
Beilstein number: |
506008 |
Radhamma, M., Venkatesu, P., Hofman, T., Prabhakara Rao, M. V.
Vapor-liquid equilibrium for the binary mixtures of dimethylsulfoxide with substituted benzenes
Fluid Phase Equilib.
• Year: 2007
• Volume: 262
• Pages: 32-36.
Keywords:
Dimethylsulfoxide, Substituted benzenes, Vapor-liquid equilibrium, Activity coefficients, Excess Gibbs free energies, Empirical equations
DOI: 10.1016/j.fluid.2007.08.001
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2007.08.001.xml
|
H. Shekaari and S. S. Mousavi
Volumetric properties of ionic liquid 1,3-dimethylimidazolium methyl sulfate + molecular solvents at T = (298.15 - 328.15) K
Fluid Phase Equilib.
• Year: 2010
• Volume: 291
• Pages: 201-207.
Keywords:
Ionic liquid, 1,3-Dimethylimidazolium methyl sulfate, Apparent molar volume, Molecular solvents
DOI: 10.1016/j.fluid.2010.01.002
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2010.01.002.xml
|
Govinda, V.[Varadhi], Attri, P.[Pankaj], Venkatesu, P., Venkateswarlu, P.
Thermophysical properties of dimethylsulfoxide with ionic liquids at various temperatures
Fluid Phase Equilib.
• Year: 2011
• Volume: 304
• Pages: 35-43.
Keywords:
DMSO, Ionic liquids, Thermophysical properties, Molecular interactions
DOI: 10.1016/j.fluid.2011.02.010
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2011.02.010.xml
|
A. Mohs, S. Decker and J. Gmehling
The solid-liquid equilibrium of the binary system H2O-DMSO and the influence of a salt (NaCl, KCl) on the thermodynamic behavior Correlations using a revised LIQUAC model
Fluid Phase Equilib.
• Year: 2011
• Volume: 304
• Pages: 12-20.
Keywords:
Electrolyte solutions, LIQUAC, Experimental data, Salt solubility, Freezing point
DOI: 10.1016/j.fluid.2011.01.026
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2011.01.026.xml
|
M. Fulem, K. Ruzicka and M. Ruzicka
Recommended vapor pressures for thiophene, sulfolane, and dimethyl sulfoxide
Fluid Phase Equilib.
• Year: 2011
• Volume: 303
• Pages: 205-216.
Keywords:
Thiophene, Sulfolane, Dimethyl sulfoxide, Vapor pressure, Heat capacity, Ideal gas thermodynamic properties, Vaporization enthalpy, Recommended vapor pressure equation
DOI: 10.1016/j.fluid.2011.02.002
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2011.02.002.xml
|
Zilnik, L. F., Jazbinsek, A., Hvala, A., Vrecer, F., Klamt, A.[Andreas]
Solubility of sodium diclofenac in different solvents
Fluid Phase Equilib.
• Year: 2007
• Volume: 261
• Pages: 140-145.
Keywords:
Drug, SLE modeling, Sodium diclofenac
DOI: 10.1016/j.fluid.2007.07.020
ThermoML:
http://trc.nist.gov/ThermoML/fpe/j.fluid.2007.07.020.xml
|
H. Shekaari and M. T. Zafarani-Moattar
Volumetric Properties of the Ionic Liquid, 1-Butyl-3-methylimidazolium Tetrafluoroborate, in Organic Solvents at T = 298.15 K
Int. J. Thermophys.
• Year: 2008
• Volume: 29
• Pages: 534-545.
Keywords:
Apparent molar volume, 1-butyl-3-methylimidazolium tetrafluoroborate, Ionic liquids, Ion-solvent interactions, Isentropic compressibility
DOI: 10.1016/s10765-008-0395-z
ThermoML:
http://trc.nist.gov/ThermoML/ijt/s10765-008-0395-z.xml
|
R. Sadeghi, H. Shekaari and R. Hosseini
Volumetric and Isentropic Compressibility Behavior of Ionic Liquid, 1-Propyl-3-Methylimidazolium Bromide in Acetonitrile, Dimethylformamide, and Dimethylsulfoxide at T = (288.15 to 308.15) K
Int. J. Thermophys.
• Year: 2009
• Volume: 30
• Pages: 1491-1509.
Keywords:
Ionic liquids, Isentropic compressibility, 1-Propyl-3-methylimidazolium bromide, Volumetric properties
DOI: 10.1016/s10765-009-0648-5
ThermoML:
http://trc.nist.gov/ThermoML/10.1007/s10765-009-0648-5.xml
|
Ali, A., Hyder, S.[Soghra], Tariq, M.
Measurements of the Properties of Binary Mixtures of Dimethylsulphoxide (DMSO) with 1-Alkanols (C4, C6, C7) at 303.15K
Int. J. Thermophys.
• Year: 2005
• Volume: 26
• Pages: 1537-1548.
Keywords:
1-butanol, density, dimethylsulphoxide, 1-hexanol, 1-heptanol, refractive index, ultrasonic velocity.
DOI: 10.1016/2005alihyd0
ThermoML:
http://trc.nist.gov/ThermoML/ijt/2005alihyd0.xml
|
Radhamma, M., Hsieh, C.-T.[Cheng-Ting], Venkatesu, P., Rao, M. V. P.[Murari Venkata Prabhakara], Lee, M. J.[Ming-Jer], Lin, H. M.[Ho-Mu]
Isobaric Vapor Liquid Equilibrium for Dimethylsulfoxide with Chloroethanes and Chloroethenes
J. Chem. Eng. Data
• Year: 2008
• Volume: 53
• Pages: 374-377.
DOI: 10.1021/je700408x
ThermoML:
http://trc.nist.gov/journals/jced/2008v53/i02/je700408x.xml
|
Zarei, H. A.[Hossein A.], Lavasani, M. Z., Iloukhani, H.
Densities and Volumetric Properties of Binary and Ternary Liquid Mixtures of Water (1) + Acetonitrile (2) + Dimethyl Sulfoxide (3) at Temperatures from (293.15 to 333.15) K and at Ambient Pressure (81.5 kPa)
J. Chem. Eng. Data
• Year: 2008
• Volume: 53
• Pages: 578-585.
DOI: 10.1021/je700645p
ThermoML:
http://trc.nist.gov/journals/jced/2008v53/i02/je700645p.xml
|
J. Wang, S. Zhang, H. Wang and Y. Pei
Apparent Molar Volumes and Electrical Conductance of Ionic Liquids [Cnmim]Br (n = 8, 10, 12) in Ethylene Glycol, N,N-Dimethylformamide, and Dimethylsulfoxide at 298.15 K
J. Chem. Eng. Data
• Year: 2009
• Volume: 54
• Pages: 3252-3258.
DOI: 10.1021/je9002306
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je9002306.xml
|
F. Comelli, R. Francesconi, A. Bigi and K. Rubini
Excess Molar Enthalpies, Molar Heat Capacities, Densities, Viscosities, and Refractive Indices of Dimethyl Sulfoxide + 1-Propanol at (288.15, 298.15, and 308.15) K and at Normal Pressure
J. Chem. Eng. Data
• Year: 2006
• Volume: 51
• Pages: 1711-1716.
DOI: 10.1021/je0601513
ThermoML:
http://trc.nist.gov/journals/jced/2006v51/i05/je0601513.xml
|
F. Comelli, R. Francesconi, A. Bigi and K. Rubini
Excess Molar Enthalpies, Molar Heat Capacities, Densities, Viscosities, and Refractive Indices of Dimethyl Sulfoxide + Esters of Carbonic Acid at 308.15 K and Atmospheric Pressure
J. Chem. Eng. Data
• Year: 2006
• Volume: 51
• Pages: 665-670.
Keywords:
excess molar enthalpy, molar heat capacity, density, viscosity, refractice indices, dimethyl sulfoxide
DOI: 10.1021/je050444g
ThermoML:
http://trc.nist.gov/journals/jced/2006v51/i02/je050444g.xml
|
T.-C. Bai and Q. Li
Measurement of Activity Coefficients of Solutes at Infinite Dilution in (Dimethyl Sulfoxide + Acetamide, or Formamide, or Urea) Using Gas Liquid Chromatography at the Temperature 298.15 K
J. Chem. Eng. Data
• Year: 2003
• Volume: 48
• Pages: 1194-1201.
Keywords:
gas-liquid chromatography, activity coefficients, infinite dilution, dimethyl sulfoxide, selectivity
DOI: 10.1021/je030122h
ThermoML:
http://trc.nist.gov/journals/jced/2003v48/i05/je030122h.xml
|
F. Comelli, S. Ottani, R. Francesconi and C. Castellari
Excess Molar Enthalpies of Binary Mixtures Containing Glycols or Polyglycols + Dimethyl Sulfoxide at 308.15 K
J. Chem. Eng. Data
• Year: 2003
• Volume: 48
• Pages: 995-998.
Keywords:
glycols, dimethyl sulfoxide, excess molar enthalpies
DOI: 10.1021/je034007i
ThermoML:
http://trc.nist.gov/journals/jced/2003v48/i04/je034007i.xml
|
Q. Wang, H. Xu and X. Li
Solubilities of Terephthalic Acid in Dimethyl Sulfoxide + Water and in N,N-Dimethylformamide + Water from (301.4 to 373.7) K
J. Chem. Eng. Data
• Year: 2005
• Volume: 50
• Pages: 719-721.
Keywords:
Solubility, Terephthalic acid, Dimethyl sulfoxide, N,N-Dimethylformamide Water;
DOI: 10.1021/je049577c
ThermoML:
http://trc.nist.gov/journals/jced/2005v50/i02/je049577c.xml
|
R. Francesconi, A. Bigi, K. Rubini and F. Comelli
Excess Enthalpies, Heat Capacities, Densities, Viscosities and Refractive Indices of Dimethyl Sulfoxide + Three Aryl Alcohols at 308.15 K and Atmospheric Pressure
J. Chem. Eng. Data
• Year: 2005
• Volume: 50
• Pages: 1932-1937.
Keywords:
Excess Enthalpies, heat capacities, densities, viscosities, refractive indices, dimethyl sulfoxide, aryl alcohols
DOI: 10.1021/je0501991
ThermoML:
http://trc.nist.gov/journals/jced/2005v50/i06/je0501991.xml
|
J. G. Baragi, M. I. Aralaguppi, T. M. Aminabhavi, M. Y. Kariduraganavar and A. Kittur
Density, Viscosity, Refractive Index, and Speed of Sound for Binary Mixtures of Anisole with 2-Chloroethanol, 1,4-Dioxane, Tetrachloroethylene, Tetrachloroethane, DMF, DMSO, and Diethyl Oxalate at (298.15, 303.15, and 308.15) K
J. Chem. Eng. Data
• Year: 2005
• Volume: 50
• Pages: 910-916.
Keywords:
density, viscosity, refractive index, speed of sound, binary, mixture
DOI: 10.1021/je049610v
ThermoML:
http://trc.nist.gov/journals/jced/2005v50/i03/je049610v.xml
|
T. Kimura, T. Matsushita, T. Kamiyama and S. Takagi
Excess Enthalpies of {CH3(CH2)nCN, n = 5 to 12} + Methyl Methylthiomethyl Sulfoxide or + Dimethyl Sulfoxide at 298.15 K
J. Chem. Eng. Data
• Year: 2004
• Volume: 49
• Pages: 1046-1051.
Keywords:
excess enthalpy, methyl methylthiomethyl sulfoxide, dimethyl sulfoxide, aliphatic, infinite dilution
DOI: 10.1021/je0499317
ThermoML:
http://trc.nist.gov/journals/jced/2004v49/i04/je0499317.xml
|
C. Pan, Q. Ke, G. Ouyang, X. Zhen, Y. Yang and Z. Huang
Excess Molar volumes and Surface Tensions of Trimethylbenzene with Tetrahydrofuran Tetrachloromethane and Dimethylsulfoxide at 298.15 K
J. Chem. Eng. Data
• Year: 2004
• Volume: 49
• Pages: 1839-1842.
Keywords:
Density, Surface tension, Trimethylbenzene, Tetrahydrofuran, Tetrachloromethane, Dimethylsulfoxide
DOI: 10.1021/je0497294
ThermoML:
http://trc.nist.gov/journals/jced/2004v49/i06/je0497294.xml
|
Q.-Y. Wang, H. Zeng, H. Song, Q.-S. Liu and S. Yao
Vapor-Liquid Equilibria for the Ternary System Acetonitrile + 1-Propanol + Dimethyl Sulfoxide and the Corresponding Binary Systems at 101.3 kPa
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 5271-5275.
DOI: 10.1021/je100033s
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je100033s.xml
|
Wang, Y.-H.[Yan-Hong], Hu, Z.[Zhen], Long, J.[Jun], Meng, X.-L.[Xiang-Li], Song, Y.-J.[Yuan-Jun], Huang, Y. D.
Solubility of 2,6-Diamino-3,5-dinitropyridine and 2,5-Dihydroxyterephthalic Acid in N,N-Dimethylformamide, Dimethylsulfoxide, Ethanol, and Methanol, N,N-Dimethylacetamide, and Acetic Acid
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 561-565.
DOI: 10.1021/je900367v
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je900367v.xml
|
Piekarski, H., Kubalczyk, K.
Thermochemical Examination of NaI, NaBPh4, and Ph4PI in the Mixtures of Acetonitrile with N,N-Dimethylformamide and Dimethylsulfoxide at 298.15 K: Properties of Acetonitrile-Containing Mixtures as Solvents for Electrolytes
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 1945-1950.
DOI: 10.1021/je900920p
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je900920p.xml
|
J. Hunger, R. Buchner, M. E. Kandil, E. F. May and K. N. Marsh
Relative Permittivity of Dimethylsulfoxide and N,N-Dimethylformamide at Temperatures from (278 to 328) K and Pressures from (0.1 to 5) MPa
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 2055-2065.
DOI: 10.1021/je9010773
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je9010773.xml
|
M. Bester-Rogac, J. Hunger, A. Stoppa and R. Buchner
Molar Conductivities and Association Constants of 1-Butyl-3-methylimidazolium Chloride and 1-Butyl-3-methylimidazolium Tetrafluoroborate in Methanol and DMSO
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 1799-1803.
DOI: 10.1021/je900531b
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je900531b.xml
|
Zamir, T.[Talat], Tasleem, S., Uddin, F.[Fahim], Durrani, S.[Shaheen]
Densities and Viscosities of Rubidium Bromide in Dimethyl Sulfoxide + Water Mixtures in the Temperature Range t = (25 to 45) deg C
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 666-672.
DOI: 10.1021/je9001027
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je9001027.xml
|
D. Warminska, J. Wawer and W. Grzybkowski
Thermodynamic Properties of Inorganic Salts in Nonaqueous Solvents. VI. Apparent Molar Volumes, Expansibilities, and Compressibilities of Divalent Transition Metal Ions in Methanol and Dimethylsulfoxide
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 2116-2122.
DOI: 10.1021/je900732r
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je900732r.xml
|
G. Egorov, D. Makarov and A. Kolker
Densities and Volumetric Properties of Ethylene Glycol + Dimethylsulfoxide Mixtures at Temperatures of (278.15 to 323.15) K and Pressures of (0.1 to 100) MPa
J. Chem. Eng. Data
• Year: 2010
• Volume: 55
• Pages: 3481-3488.
DOI: 10.1021/je100089s
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je100089s.xml
|
L. Weng, W. Li, J. Zuo and C. Chen
Osmolality and Unfrozen Water Content of Aqueous Solution of Dimethyl Sulfoxide
J. Chem. Eng. Data
• Year: 2011
• Volume: 56
• Pages: 3175-3182.
Keywords:
DMSO, DSC, Melting temperature, Osmolality, Unfrozen water, Effective, 29 latent heat of fusion
DOI: 10.1021/je2002607
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je2002607.xml
|
A. Guo, X. Hu, G. Fang, S. Shao and H. Zhang
Enthalpies of Dilution of 1,3-Propanediol and Isomers of 2,3-Butanediol in Dimethylsulfoxide + Water Mixtures at 298.15 K
J. Chem. Eng. Data
• Year: 2011
• Volume: 56
• Pages: 2489-2500.
Keywords:
Isothermal titration calorimetry, enthalpic pairwise interaction coefficient, diol, isomers, DMSO, chiral discrimination effect
DOI: 10.1021/je101353r
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je101353r.xml
|
H. Li, H. Wang and L. Zhao
Measurement and Correlation for Solubility of 11alpha-Hydroxy-16alpha,17alpha-epoxyprogesterone and 16alpha,17alpha-Epoxyprogesterone in Solvents
J. Chem. Eng. Data
• Year: 2011
• Volume: 56
• Pages: 1134-1138.
Keywords:
Solubility, 11a-Hydroxy-16a,17a-epoxyprogesterone, isopropanol, n-propanol,, DMSO, dioxane, 1-butanol, 16a,17a-epoxyprogesterone.
DOI: 10.1021/je101072d
ThermoML:
http://trc.nist.gov/ThermoML/10.1021/je101072d.xml
|
M. N. Roy, B. K. Sarkar and R. Chanda
Viscosity, Density, and Speed of Sound for the Binary Mixtures of Formamide with 2-Methoxyethanol, Acetophenone, Acetonitrile, 1,2-Dimethoxyethane, and Dimethylsulfoxide at Different Temperatures
J. Chem. Eng. Data
• Year: 2007
• Volume: 52
• Pages: 1630-1637.
DOI: 10.1021/je700026d
ThermoML:
http://trc.nist.gov/journals/jced/2007v52/i05/je700026d.xml
|
W. L. Weng, J. -T. Chen and J.-W. Yang
Isothermal Vapor-Liquid Equilibria of Binary Mixtures of Nitrogen with Dimethyl Sulfoxide, N-Methyl-2-pyrrolidone, and Diethylene Glycol Monobutyl Ether at Elevated Pressures
J. Chem. Eng. Data
• Year: 2007
• Volume: 52
• Pages: 511-516.
Keywords:
vapor-liquid phase equilibrium, binary systems,
DOI: 10.1021/je6005357
ThermoML:
http://trc.nist.gov/journals/jced/2007v52/i02/je6005357.xml
|
F. Comelli, R. Francesconi, A. Bigi and K. Rubini
Molar Heat Capacities, Densities, Viscosities, and Refractive Indices of Dimethyl Sulfoxide + Tetrahydropyran and + 2-Methyltetrahydrofuran at (293.15, 303.15, and 313.15) K
J. Chem. Eng. Data
• Year: 2007
• Volume: 52
• Pages: 639-644.
Keywords:
Molar heat capacities, densities, dynamic viscosities, refractive indices, binary mixtures, dimethyl sulfoxide, tetrahydropyran, 2-methyltetrahydrofuran
DOI: 10.1021/je600557n
ThermoML:
http://trc.nist.gov/journals/jced/2007v52/i02/je600557n.xml
|
H. Wang and W. Liu
Experimental densities and excess volumes for binary mixtures of (dimethyl sulfoxide + an aromatic hydrocarbon) at temperatures from (293.15 to 353.15) K at atmospheric pressure
J. Chem. Thermodyn.
• Year: 2004
• Volume: 36
• Pages: 939-947.
Keywords:
Dimethyl sulfoxide, Benzene, Toluene, Ethylbenzene, Styrene, Binary mixture, Density, Temperature dependence
DOI: 10.1016/j.jct.2004.07.024
ThermoML:
http://trc.nist.gov/journals/jct/2004v36/i11/j.jct.2004.07.024.xml
|
M. Tjahjono and M. Garland
Deuterium isotope effect on molar heat capacities and apparent molar heat capacities in dilute aqueous solutions: A multi-channel heat-flow microcalorimeter study
J. Chem. Thermodyn.
• Year: 2008
• Volume: 40
• Pages: 1600-1606.
Keywords:
Thermodynamic solution Partial molar properties Deuterium isotope effect
DOI: 10.1016/j.jct.2008.06.008
ThermoML:
http://trc.nist.gov/ThermoML/10.1016/j.jct.2008.06.008.xml
|
Swenson, D. M., Blodgett, M. B., Ziemer, S. P., Woolley, E. M.
Apparent molar volumes and apparent molar heat capacities of aqueous tetrahydrofuran, dimethyl sulfoxide, 1,4-dioxane, and 1,2-dimethoxyethane at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa
J. Chem. Thermodyn.
• Year: 2008
• Volume: 40
• Pages: 248-259.
DOI: 10.1016/j.jct.2007.06.010
ThermoML:
http://trc.nist.gov/ThermoML/jct/j.jct.2007.06.010.xml
|
Miecznik, P., Kaczmarek, M.[Milena]
Adiabatic compressibility of pseudo-binary aqueous solutions of tert-butyl alcohol and dimethylsulfoxide as a result of ultrasonic investigations
J. Chem. Thermodyn.
• Year: 2006
• Volume: 38
• Pages: 1450-1454.
Keywords:
Ultrasonic speed, Compressibility, Complexation, Aqueous solutions, Hydrogen bond
DOI: 10.1016/2006miekac0
ThermoML:
http://trc.nist.gov/ThermoML/jct/2006miekac0.xml
|
Q. Yuan, Z. Li and B. -H. Wang
Partial molar volumes of L-alanine, DL-serine, DL-threonine, L-histidine, glycine, and glycylglycine in water, NaCl, and DMSO aqueous solutions at T = 298.15 K
J. Chem. Thermodyn.
• Year: 2006
• Volume: 38
• Pages: 20-33.
Keywords:
partial molar volumes of transfer, amino acid, sodium chloride, dimethyl sulfoxide, side chain contribution, cosphere overlap model
DOI: 10.1016/j.jct.2005.03.015
ThermoML:
http://trc.nist.gov/journals/jct/2006v38/i01/j.jct.2005.03.015.xml
|
M. J. Iqbal and m. a. chaudhry
Effect of temperature on volumetric and viscometric properties of some non-steroidal anti-inflammatory drugs in aprotic solvents
J. Chem. Thermodyn.
• Year: 2010
• Volume: 42
• Pages: 951-956.
Keywords:
Partial molar volume, Viscosity B-coefficient, Hydration number, Free activation energy, Free activation enthalpy
DOI: 10.1016/j.jct.2010.03.009
ThermoML:
http://trc.nist.gov/ThermoML/10.1016/j.jct.2010.03.009.xml
|
Bhuiyan, M. M. H., Ferdaush, J., Uddin, M. H.
Densities and viscosities of binary mixtures of {dimethylsulfoxide + aliphatic lower alkanols (C1 C3)} at temperatures from T = 303.15 K to T = 323.15 K
J. Chem. Thermodyn.
• Year: 2007
• Volume: 39
• Pages: 675-683.
Keywords:
Excess molar volume, Viscosity, DMSO, Interaction parameters
DOI: 10.1016/j.jct.2006.10.016
ThermoML:
http://trc.nist.gov/ThermoML/jct/j.jct.2006.10.016.xml
|
Radhamma, M., Venkatesu, P., Prabhakara Rao, M. V., Prasad, D. H. L.
Excess enthalpies and (vapour + liquid) equilibrium data for the binary mixtures of dimethylsulphoxide with ketones
J. Chem. Thermodyn.
• Year: 2007
• Volume: 39
• Pages: 1661-1666.
Keywords:
Excess enthalpies, (Vapour + liquid) equilibrium, DMSO, Ketones, Molecular interactions
DOI: 10.1016/j.jct.2007.04.004
ThermoML:
http://trc.nist.gov/ThermoML/jct/j.jct.2007.04.004.xml
|
N. Nunes, L. Moreira, R. E. Leitao and F. Martins
Determination of solvation and specific interaction enthalpies of adamantane derivatives in aprotic solvents
J. Chem. Thermodyn.
• Year: 2007
• Volume: 39
• Pages: 1201-1205.
Keywords:
Adamantane derivatives, Aprotic solvents, Solution enthalpy, Solvation enthalpy, Specific interactions
DOI: 10.1016/j.jct.2006.12.002
ThermoML:
http://trc.nist.gov/ThermoML/jct/j.jct.2006.12.002.xml
|
Radhamma, M., Liao, W.-C.[Wei-Chen], Venkatesu, P., Rao, M. V. P., Lee, M. J.[Ming-Jer], Lin, H. M.[Ho-Mu]
Excess molar enthalpies of dimethylsulfoxide with chloroethanes and chloroethenes at 298.15K
Thermochim. Acta
• Year: 2007
• Volume: 465
• Pages: 1-5.
Keywords:
Excess molar enthalpies, Binary mixture, Dimethylsulfoxide, Chloroethanes and chloroethenes, Molecular interactions, Theoretical models
DOI: 10.1016/j.tca.2007.08.008
ThermoML:
http://trc.nist.gov/ThermoML/tca/j.tca.2007.08.008.xml
|
Behbehani, G. R., Ghammamy, S., Waghorne, W. E.[W. Earle]
Enthalpies of transfer of acetonitrile from water to aqueous methanol, ethanol and dimethylsulphoxide mixtures at 298.15K
Thermochim. Acta
• Year: 2006
• Volume: 428
• Pages: 37-40.
Keywords:
Acetonitrile, Enthalpies transfer, Preferential solvation, Variable (an + bN)
DOI: 10.1016/2006behgha1
ThermoML:
http://trc.nist.gov/ThermoML/tca/2006behgha1.xml
|
R. Francesconi, F. Comelli, A. Bigi and K. Rubini
Thermophysical properties of dimethyl sulfoxide + cyclic and linear ethers at 308.15K Application of an extended cell model
Thermochim. Acta
• Year: 2006
• Volume: 447
• Pages: 154-160.
Keywords:
Excess molar enthalpy, Heat capacity, Liquid mixtures, Cell model
DOI: 10.1016/2006fracom0
ThermoML:
http://trc.nist.gov/ThermoML/tca/2006fracom0.xml
|
K. Rubini, R. Francesconi, A. Bigi and F. Comelli
Excess molar enthalpies and heat capacities of dimethyl sulfoxide + seven normal alkanols at 303.15K and atmospheric pressure
Thermochim. Acta
• Year: 2007
• Volume: 452
• Pages: 124-127.
Keywords:
Excess enthalpy, Heat capacity, DMSO, Alkanols, Redlich Kister
DOI: 10.1016/j.tca.2006.10.025
ThermoML:
http://trc.nist.gov/ThermoML/tca/j.tca.2006.10.025.xml
|
|
|